How to Change Engine Oil in a Power Washer35

Changing the engine oil in your power washer is a relatively simple task that can help to extend the life of your machine. Here is a step-by-step guide on how to do it:

Materials you will need:* New engine oil (check your power washer's manual for the recommended type and amount)
* Oil filter (if applicable)
* Oil drain pan
* Funnel
* Rags
* Gloves (optional)

Safety first:* Make sure the power washer is turned off and cooled down before you begin.
* Wear gloves to protect your hands from hot oil.
* Work in a well-ventilated area.

Step 1: Locate the oil drain plugThe oil drain plug is usually located on the bottom of the engine. It is typically a 17mm or 19mm bolt.

Step 2: Place the oil drain pan under the drain plugPosition the oil drain pan under the drain plug to catch the used oil.

Step 3: Remove the drain plugUse a wrench to carefully loosen the drain plug. Allow the oil to drain completely into the pan.

Step 4: Replace the oil filter (if applicable)Some power washers have an oil filter. If yours does, it is important to replace it at the same time as you change the oil. To do this, simply unscrew the old filter and screw on the new one.

Step 5: Replace the drain plugOnce the oil has drained completely, replace the drain plug and tighten it securely.

Step 6: Add new oilUse a funnel to add new engine oil to the power washer. Add the amount of oil specified in your power washer's manual.

Step 7: Check the oil levelUse the dipstick to check the oil level. The oil level should be between the "min" and "max" marks on the dipstick.

Step 8: Start the power washerStart the power washer and let it run for a few minutes to circulate the new oil.

Step 9: Check for leaksInspect the power washer for any leaks. If you see any leaks, tighten the drain plug or oil filter until the leak stops.

Tips:* Change the engine oil in your power washer every 50-100 hours of use.
* Use the correct type of engine oil specified in your power washer's manual.
* Dispose of the used oil properly.
* If you are not comfortable changing the engine oil yourself, you can take your power washer to a qualified technician.

2024-12-21

Previous：CarPlay Dongle: Removal Instructions for Maximum Performance

Next：Magnetic Foldable Phone Holder For Car: The Ultimate Guide to Hands-Free Convenience