How to Change a Flat Tire with a Car Air Compressor271

Changing a flat tire can be a daunting task, especially if you've never done it before. But with the right tools and a little bit of know-how, it's a job that you can easily do yourself. In this article, we'll walk you through the steps on how to change a flat tire using a car air compressor.

Materials You'll Need
Car air compressor
Tire plug kit
Jack
Jack stands
Wheel chocks
Lug wrench
Spare tire

Safety First

Before you begin, it's important to take some safety precautions. Park your car on a flat, level surface and engage the parking brake. Place wheel chocks behind the wheels opposite the flat tire. This will help prevent your car from rolling while you're working on it.

Step 1: Loosen the Lug Nuts

Using the lug wrench, loosen the lug nuts on the flat tire, but do not remove them completely. Turn the lug nuts counterclockwise until they are loose enough to be removed by hand.

Step 2: Jack Up the Car

Place the jack in the designated jack point near the flat tire. Refer to your car's owner's manual for the specific jack point location. Slowly pump the jack until the flat tire is about 6 inches off the ground.

Step 3: Remove the Flat Tire

Once the car is jacked up, carefully remove the lug nuts and pull the flat tire straight towards you to detach it from the wheelbase.

Step 4: Mount the Spare Tire

Lift the spare tire onto the wheelbase and align it with the lug bolts. Hand-tighten the lug nuts onto the bolts.

Step 5: Lower the Car

Slowly lower the car by releasing the jack. Do not remove the jack completely yet.

Step 6: Tighten the Lug Nuts

Using the lug wrench, tighten the lug nuts as much as possible by hand. Then, use the lug wrench to further tighten the lug nuts, turning them clockwise until they are snug. Do not overtighten the lug nuts.

Step 7: Remove the Jack

Once the lug nuts are tightened, remove the jack completely.

Step 8: Stow the Flat Tire and Tools

Place the flat tire in the trunk of your car. Securely fasten the lug wrench, jack, and any other tools you used.

Step 9: Inflate the Spare Tire

Connect the air compressor to the spare tire's valve stem. Turn on the air compressor and inflate the tire to the recommended pressure, which can be found on the sidewall of the tire. Once the tire is inflated, remove the air compressor.

Step 10: Check the Tire Pressure Regularly

After changing the flat tire, it's important to check the tire pressure regularly. A properly inflated tire will help ensure a smooth and safe ride.

Tips
If you have a tire plug kit, you may be able to repair the flat tire instead of replacing it. Follow the instructions in the tire plug kit to repair the puncture.
If you're not comfortable changing a flat tire yourself, you can call a roadside assistance service.
Always refer to your car's owner's manual for specific instructions on changing a flat tire.

Changing a flat tire with a car air compressor is a relatively simple task that can be completed in about 30 minutes. By following these steps, you can save yourself the time and expense of having to call a roadside assistance service.

2025-01-03

Previous：How to Download Car Radio Stations

Next：Is It Safe to Use Car Air Compressors?