How to Disassemble a Xiaomi Electric Scooter129

Xiaomi electric scooters are popular for their portability and affordability. However, if you need to repair or replace any parts, you may need to disassemble the scooter. Here is a step-by-step guide on how to do it:

Step 1: Gather Tools

You will need the following tools:
Phillips head screwdriver
Hex key set
Pliers
Spanner

Step 2: Remove the Battery

The battery is located under the deck of the scooter. To remove it, you must first remove the four Phillips head screws that hold the deck in place. Once the screws are removed, lift the deck and disconnect the battery connector. Then, lift the battery out of the scooter.

Step 3: Remove the Rear Wheel

The rear wheel is held in place by two bolts. To remove it, use a spanner to unscrew the bolts. Once the bolts are removed, pull the wheel straight out of the frame.

Step 4: Remove the Front Wheel

The front wheel is held in place by a single bolt. To remove it, use a hex key to unscrew the bolt. Once the bolt is removed, pull the wheel straight out of the frame.

Step 5: Remove the Handlebar Stem

The handlebar stem is held in place by four bolts. To remove it, use a hex key to unscrew the bolts. Once the bolts are removed, lift the handlebar stem out of the frame.

Step 6: Remove the Dashboard

The dashboard is held in place by two screws. To remove it, use a Phillips head screwdriver to unscrew the screws. Once the screws are removed, pull the dashboard straight out of the frame.

Step 7: Remove the Throttle Grips

The throttle grips are held in place by two screws. To remove them, use a Phillips head screwdriver to unscrew the screws. Once the screws are removed, pull the throttle grips straight off the handlebars.

Step 8: Remove the Brake Levers

The brake levers are held in place by two bolts. To remove them, use a hex key to unscrew the bolts. Once the bolts are removed, pull the brake levers straight off the handlebars.

Step 9: Remove the Mudguards

The mudguards are held in place by two screws. To remove them, use a Phillips head screwdriver to unscrew the screws. Once the screws are removed, lift the mudguards off the frame.

Step 10: Remove the Frame

The frame is held in place by four bolts. To remove it, use a spanner to unscrew the bolts. Once the bolts are removed, lift the frame straight off the deck.

Conclusion

Disassembling a Xiaomi electric scooter is not difficult, but it does require some patience and care. By following the steps in this guide, you can safely disassemble your scooter and make any necessary repairs or replacements.

2025-01-06

Previous：An Extensive Guide to the Nissan Sylphy 14 Car Phone Holder

Next：DIY Car Air Freshener: A Guide to Creating Your Own Custom Scents