How to Remove the Rear Wheel of an Electric Scooter327

Electric scooters are becoming increasingly popular as a convenient and eco-friendly way to get around. They are relatively easy to maintain, but there are a few things you need to know in order to keep your scooter running smoothly. One of the most common maintenance tasks is replacing the rear wheel. This can be done in a few simple steps, and with the right tools, it can be completed in less than an hour.

Tools you will need:
10mm wrench
14mm wrench
15mm wrench
Hammer
Punch
Tire levers
New tire and tube

Instructions:
Remove the nut holding the rear wheel on. This nut is located on the right side of the scooter, just above the rear wheel. Use a 15mm wrench to loosen the nut until it is completely removed.
Remove the rear wheel. Once the nut is removed, you can simply pull the rear wheel straight off of the axle. Be careful not to damage the wheel or the axle while doing this.
Remove the tire from the rim. This can be done using tire levers. Be careful not to damage the tube or the rim while doing this.
Replace the tube. If the tube is damaged, it will need to be replaced. To do this, simply remove the old tube from the tire and insert the new tube into the tire. Be sure to position the valve stem correctly.
Remount the tire on the rim. This can be done using tire levers. Be careful not to pinch the tube while doing this.
Reinstall the rear wheel. Slide the rear wheel back onto the axle and tighten the nut until it is snug. Do not overtighten the nut.
Test ride the scooter. Once the rear wheel is installed, take the scooter for a test ride to make sure that everything is working properly.

Replacing the rear wheel of an electric scooter is a relatively simple task that can be completed in less than an hour with the right tools. By following these instructions, you can keep your scooter running smoothly for years to come.

2025-02-03

Previous：Are Digital Tire Inflator Pressure Gauges Accurate?

Next：DIY Car Stereo to Home Audio System