How to Remove a Tire from a Xiaomi Electric Scooter41

Introduction

Xiaomi electric scooters are popular for their affordability, portability, and ease of use. However, like any other vehicle, they require maintenance and repairs from time to time. One of the most common maintenance tasks is changing a flat tire. In this article, we will provide a step-by-step guide on how to remove a tire from a Xiaomi electric scooter.

Tools Required
10mm wrench
13mm wrench
Tire lever
New tire (if replacing)

Step-by-Step Instructions

1. Safety First

Before you begin, make sure that the scooter is turned off and unplugged. Also, wear safety glasses to protect your eyes from flying debris.

2. Remove the Brake Caliper

Locate the brake caliper on the side of the wheel you want to remove. Using a 13mm wrench, loosen the two bolts that hold the caliper in place. Once the bolts are loose, carefully remove the caliper and set it aside.

3. Remove the Axle Nut

Locate the axle nut on the opposite side of the wheel. Using a 10mm wrench, loosen the axle nut by turning it counterclockwise. Do not remove the axle nut completely at this stage.

4. Loosen the Wheel Hub

Using the 13mm wrench, loosen the four bolts that hold the wheel hub in place. Do not remove the bolts completely.

5. Slide the Wheel Out

Once the bolts are loose, you should be able to slide the wheel out of the fork. Be careful not to drop the wheel.

6. Break the Bead

The bead is the part of the tire that sits on the rim. To remove the tire, you need to break the bead. To do this, use a tire lever to pry the tire away from the rim. Start at one point and work your way around the entire circumference of the tire.

7. Remove the Tire

Once the bead is broken, you can remove the tire from the rim. Be careful not to damage the tire or the rim.

8. Install the New Tire (if replacing)

If you are replacing the tire, reverse the above steps to install the new tire. Make sure that the tire is properly seated on the rim and that the bead is securely in place.

9. Tighten the Wheel Hub Bolts

Once the tire is in place, tighten the four wheel hub bolts using a 13mm wrench.

10. Tighten the Axle Nut

Tighten the axle nut using a 10mm wrench. Do not overtighten the axle nut.

11. Reinstall the Brake Caliper

Reinstall the brake caliper by aligning it with the brake disc. Tighten the two caliper bolts using a 13mm wrench.

12. Test the Scooter

Once the tire is installed, test the scooter to make sure that the brake and wheel are working properly.

Conclusion

Changing a tire on a Xiaomi electric scooter is a relatively simple task that can be completed in under 30 minutes. By following the steps outlined in this article, you can easily remove a tire from your scooter and replace it with a new one.

2025-02-21

Previous：How to Repair a Nissan Livina Car Radio

Next：Electric Scooters: A Comprehensive Guide to Prices and Features