How to Remove and Replace a Car Radio in a Nissan Sunny115

Materials* Replacement car radio
* Phillips head screwdriver
* Pry tool (optional)

Safety Precautions* Disconnect the negative terminal of the car battery before starting any electrical work.
* Allow the car to cool down completely before beginning.

Step 1: Remove the Dashboard Trim* Use the Phillips head screwdriver to remove the two screws located at the top of the dashboard trim.
* Gently pry the trim away from the dashboard, starting from the bottom corners.
* Disconnect any electrical connectors attached to the trim, such as those for the hazard lights or clock.

Step 2: Remove the Radio Trim* Locate the two screws on the left and right sides of the radio trim.
* Remove the screws and pull the trim towards you to detach it from the dashboard.

Step 3: Unplug the Radio Harness* Locate the radio harness, which is a large bundle of wires connected to the back of the radio.
* Use your fingers or a small pry tool to gently release the clips holding the harness in place.
* Pull the harness away from the radio.

Step 4: Remove the Radio Mounting Bolts* On each side of the radio, locate the two mounting bolts that hold it in place.
* Use the Phillips head screwdriver to remove the bolts.

Step 5: Remove the Old Radio* Slide the old radio straight out of its housing.
* Be careful not to damage any wires or connectors.

Step 6: Install the New Radio* Slide the new radio into the housing, making sure it is properly aligned.
* Tighten the mounting bolts on both sides.

Step 7: Reconnect the Radio Harness* Plug the radio harness into the back of the new radio.
* Ensure that the clips are securely fastened.

Step 8: Reinstall the Radio Trim* Snap the radio trim back into place.
* Tighten the two screws on the sides to secure it.

Step 9: Reinstall the Dashboard Trim* Connect any electrical connectors that were previously disconnected from the dashboard trim.
* Snap the trim back onto the dashboard, starting from the top and working your way down.
* Tighten the two screws at the top of the trim.

Step 10: Reconnect the Battery* Reconnect the negative terminal of the car battery.
* Turn on the car and check that the new radio is functioning properly.

Tips* If you encounter any resistance when removing the dashboard or radio trims, do not force it. Gently pry the trim away using a plastic pry tool.
* When disconnecting electrical connectors, be careful not to damage the terminals or wires.
* If you are unsure about any part of the process, consult an automotive professional.

2025-02-24

Previous：Air Compressor Tire Inflator: Your Portable Powerhouse for Vehicle Tires

Next：Are Pump-Free Car Washers Worth It?