How to Disassemble a Jinchori Electric Chainsaw152

Jinchori electric chainsaws are well-known for their reliability and ease of use. However, there may come a time when you need to disassemble the chainsaw for maintenance or repair. This guide will provide you with step-by-step instructions on how to disassemble a Jinchori electric chainsaw.

Safety Precautions

Before you begin disassembling the chainsaw, it is important to take the following safety precautions:
Unplug the chainsaw from the power source.
Wear safety glasses and gloves.
Place the chainsaw on a stable surface.

Step 1: Remove the Chain and Guide Bar

Start by removing the chain and guide bar. To do this, loosen the chain tensioning knob and remove the chain from the guide bar. Then, remove the guide bar from the chainsaw.

Step 2: Remove the Front Cover

The front cover is held in place by two screws. Remove the screws and lift off the front cover.

Step 3: Remove the Motor Cover

The motor cover is held in place by four screws. Remove the screws and lift off the motor cover.

Step 4: Remove the Motor and Gearbox

The motor and gearbox are held together by four bolts. Remove the bolts and separate the motor and gearbox.

Step 5: Remove the Armature and Rotor

The armature and rotor are located inside the motor. To remove them, you will need to use a spanner or wrench to loosen the nut that holds them in place. Once the nut is loose, you can remove the armature and rotor.

Step 6: Remove the Gearbox Cover

The gearbox cover is held in place by two screws. Remove the screws and lift off the gearbox cover.

Step 7: Remove the Gears

The gears are located inside the gearbox. To remove them, you will need to use a spanner or wrench to loosen the nuts that hold them in place. Once the nuts are loose, you can remove the gears.

Step 8: Reassemble the Chainsaw

Once you have disassembled the chainsaw, you can reassemble it by following the above steps in reverse order. Be sure to tighten all of the screws and bolts securely.

Additional Tips

Here are some additional tips for disassembling a Jinchori electric chainsaw:
If you are having trouble removing a screw or bolt, you can try using a penetrating oil to loosen it.
Be careful not to lose any of the small parts when you are disassembling the chainsaw.
If you are not sure how to reassemble the chainsaw, you can refer to the owner's manual.

2024-12-21

Previous：Electric Motors for Automatic Hair Curlers from Guangdong

Next：Tire Service Tools: Choosing the Right Electric Impact Wrench