Philips 4-in-1 Juicer User Guide351

Congratulations on your purchase of the Philips 4-in-1 Juicer! This appliance is designed to make juicing fruits and vegetables quick, easy, and efficient. With its powerful motor and versatile attachments, you can make a wide variety of juices, smoothies, and other delicious beverages. To ensure optimal performance and safety, please read and follow these instructions carefully before operating the juicer.

Components

Your Philips 4-in-1 Juicer comes with the following components:
Motor base
Juicing bowl
Filter basket
Pulp collector
Juice collector
Pusher
Citrus press
Smoothie maker
Measuring cup
Cleaning brush

Assembly

Before using the juicer, it is important to assemble it properly. Follow these steps:1. Place the motor base on a stable, flat surface.
2. Insert the juicing bowl onto the motor base. Align the arrows on the bowl with the corresponding notches on the base.
3. Place the filter basket inside the juicing bowl.
4. Place the pulp collector on top of the filter basket.
5. Place the juice collector under the juicing bowl.

Operation

To operate the juicer, follow these steps:1. Wash and cut fruits and vegetables into small pieces.
2. Select the desired attachment (juicing, citrus pressing, or smoothie making) and attach it to the motor base.
3. Turn on the juicer by turning the power switch to the "I" position.
4. Insert the pieces of fruit or vegetable into the juicer and use the pusher to guide them through.
5. The juice will be extracted and collected in the juice collector.
6. The pulp will be separated and collected in the pulp collector.
7. When finished juicing, turn off the juicer by turning the power switch to the "O" position.

Tips for Juicing

Here are some tips to help you get the most out of your Philips 4-in-1 Juicer:
Use fresh, ripe fruits and vegetables for the best results.
Cut fruits and vegetables into small pieces to make it easier for the juicer to extract the juice.
Do not overload the juicer. Feed pieces of fruit or vegetable into the juicer one at a time.
Use the pusher to gently guide fruits and vegetables through the juicer. Do not apply too much pressure, as this can clog the juicer.
If the juicer becomes clogged, turn it off and clear the blockage before continuing.

Cleaning and Maintenance

It is important to clean your Philips 4-in-1 Juicer after each use to ensure its optimal performance and longevity. Follow these steps:1. Disassemble the juicer by removing the juicing bowl, filter basket, pulp collector, and juice collector.
2. Rinse all removable parts under warm water.
3. Use the cleaning brush to remove any pulp or debris from the filter basket and juicing bowl.
4. Wipe down the motor base with a damp cloth.
5. Allow all parts to dry completely before reassembling the juicer.

Troubleshooting

If you encounter any problems while using your Philips 4-in-1 Juicer, consult the following troubleshooting guide:
The juicer is not turning on. Ensure that the juicer is properly assembled and that the power cord is plugged into a working outlet.
The juicer is making a loud noise. The juicer may be overloaded. Reduce the amount of fruit or vegetable being fed into the juicer.
The juice is not flowing out of the juicer. The filter basket may be clogged. Turn off the juicer and clear the blockage using the cleaning brush.
The pulp is not being separated from the juice. The filter basket may be damaged. Contact Philips customer support for assistance.

Warranty

Your Philips 4-in-1 Juicer comes with a two-year limited warranty. For more information about the warranty, please refer to the warranty card included with the product.

2025-01-03

Previous：Screw Driver Mini Set: A Comprehensive Guide for Every Handyperson

Next：Which Electric Shaver from PHILIPS Is Right for You?