Phillips Juicer Disassembly Guide397

This guide provides step-by-step instructions on how to disassemble a Phillips juicer. It is important to follow these instructions carefully to avoid damaging the juicer or causing injury to yourself.Tools Required:
* Philips screwdriver
* Hex wrench
* Socket wrench
* Flat-head screwdriver
* Pliers
Steps:
1. Unplug the juicer from the power source.
2. Remove the lid and pulp container. Push down on the tab on the back of the lid and lift it off. Then, remove the pulp container by lifting it straight up.
3. Remove the feed chute. Unscrew the two screws that hold the feed chute in place using a Philips screwdriver. Then, lift the feed chute straight up and off of the juicer.
4. Remove the filter basket. Unscrew the two screws that hold the filter basket in place using a hex wrench. Then, lift the filter basket straight up and off of the juicer.
5. Remove the cutting blade. Unscrew the five screws that hold the cutting blade in place using a socket wrench. Then, lift the cutting blade straight up and off of the juicer.
6. Remove the motor housing. Unscrew the four screws that hold the motor housing in place using a Philips screwdriver. Then, lift the motor housing straight up and off of the juicer.
7. Remove the power cord. Unscrew the two screws that hold the power cord in place using a flat-head screwdriver. Then, pull the power cord out of the juicer.
8. Disassemble the motor housing. Remove the two screws that hold the motor housing together using a socket wrench. Then, carefully separate the motor housing into two pieces.
9. Remove the motor. Remove the four screws that hold the motor in place using a socket wrench. Then, lift the motor out of the motor housing.
10. Reassemble the motor housing. Place the two pieces of the motor housing together and tighten the two screws.
11. Reinstall the power cord. Insert the power cord into the juicer and tighten the two screws.
12. Reinstall the motor. Place the motor into the motor housing and tighten the four screws.
13. Reassemble the juicer. Place the motor housing onto the juicer and tighten the four screws.
14. Reinstall the cutting blade. Place the cutting blade onto the juicer and tighten the five screws.
15. Reinstall the filter basket. Place the filter basket onto the juicer and tighten the two screws.
16. Reinstall the feed chute. Place the feed chute onto the juicer and tighten the two screws.
17. Reinstall the pulp container. Place the pulp container onto the juicer.
18. Reinstall the lid. Place the lid onto the juicer and push down on the tab on the back to secure it.
Tips:
* If you are having trouble removing a screw, try using a penetrating oil to loosen it.
* Be careful not to damage the juicer when disassembling it.
* If you are unsure about how to disassemble your Phillips juicer, please consult with a qualified appliance repair technician.