Arrow Tiger Electric Chain Saw 512 Manual228

Introduction

The Arrow Tiger Electric Chain Saw 512 is a powerful and versatile power tool designed for a variety of cutting tasks. This manual provides instructions on assembling, operating, and maintaining the chain saw safely and effectively.

Safety Precautions

Always follow these safety precautions to avoid injury:
Wear proper protective gear, including gloves, eye protection, earplugs, and a hard hat.
Never operate the saw while intoxicated or under the influence of drugs.
Keep children and pets away from the work area.
Inspect the saw before each use for any damage or loose connections.
Never cut above shoulder height or from a ladder.

Assembly

Before operating the saw, assemble it according to the following instructions:
Attach the guide bar to the chain saw body by inserting it into the guide bar slot.
Place the chain over the guide bar and into the sprocket.
Tension the chain by turning the chain tensioner knob until the chain has about 1/8 inch play.
Secure the bar cover by tightening the bolts.

Operation

To operate the chain saw, follow these steps:
Plug the saw into a power outlet.
Hold the saw firmly with both hands.
Squeeze the trigger to start the saw.
Slowly move the saw into the cut.
Release the trigger to stop the saw.

Maintenance

To maintain the chain saw, perform the following tasks:
Clean the saw after each use with a damp cloth.
Sharpen the chain as needed with a chain saw sharpener.
Replace the chain when it becomes dull or damaged.
Store the saw in a dry, well-ventilated area.

Troubleshooting

If you experience any problems with the chain saw, refer to the following troubleshooting guide:

Problem
Possible Cause
Solution


Saw won't start
Power cord not connected
Check the power cord and make sure it is securely connected to both the saw and the power outlet.


Chain is slipping
Chain tension is too loose
Tighten the chain tensioner knob until the chain has about 1/8 inch play.


Chain is cutting crooked
Guide bar is bent
Inspect the guide bar and replace it if it is bent or damaged.


Saw is smoking
Motor is overheating
Allow the saw to cool down and inspect it for any signs of damage.

Conclusion

By following the instructions in this manual, you can safely and effectively operate and maintain the Arrow Tiger Electric Chain Saw 512. If you have any questions or concerns, please consult a qualified power tool technician.

2025-01-10

Previous：Winter Clothes Storage Must-Haves

Next：Dyson‘s Best Storage Solutions for a Clutter-Free Home