How to Make a DIY Earflap Beanie with Fishnet65

Introduction

Earflap beanies or trapper hats are a must-have winter accessory. They are not only warm and comfortable, but also stylish. If you are looking for a unique and creative way to protect your ears from the cold, a DIY earflap beanie with fishnet is the perfect project for you. In this tutorial, we will show you how to make one from scratch.

Materials You Will Need
Chunky yarn (at least 150 yards)
Fishnet fabric (about 1 square yard)
Scissors
Yarn needle
Measuring tape or ruler
Pom-pom (optional)

Instructions

Step 1: Measure and Cut the Yarn

Start by measuring the circumference of your head. Then, cut 2 pieces of yarn that are twice the length of your measurement. These pieces will be used to make the brim of the beanie.

Step 2: Make a Slip Knot

Take one of the pieces of yarn and make a slip knot. Then, slip the knot onto the yarn needle.

Step 3: Chain Stitch

Chain stitch around the circumference of your head. The number of chains you make will depend on the size of your head. For an average-sized head, make about 100 chains.

Step 4: Join the Ends

Once you have finished chaining, join the ends of the yarn together by tying a slip knot.

Step 5: Cut the Fishnet Fabric

Cut a piece of fishnet fabric that is twice the length of the brim. The width of the fabric should be about 4 inches.

Step 6: Attach the Fishnet Fabric to the Brim

Fold the fishnet fabric in half lengthwise. Then, align the raw edge of the fabric with the raw edge of the brim. Sew the fishnet fabric to the brim using a blanket stitch.

Step 7: Fold Up the Brim

Fold up the brim about 1 inch and press it down with your fingers or a warm iron.

Step 8: Make the Earflaps

Cut 2 pieces of fishnet fabric that are 6 inches wide and 8 inches long. Fold each piece of fabric in half lengthwise and sew the raw edges together. Turn the earflaps right side out and press them flat.

Step 9: Attach the Earflaps

Align the raw edge of one of the earflaps with the raw edge of the brim. Sew the earflap to the brim using a blanket stitch. Repeat on the other side.

Step 10: Add a Pom-pom (Optional)

If desired, you can add a pom-pom to the top of the beanie. To make a pom-pom, wrap yarn around a piece of cardboard or a pom-pom maker. Then, tie the yarn off and trim the excess.

Conclusion

You have now successfully made a DIY earflap beanie with fishnet. This unique and stylish accessory will keep you warm and comfortable all winter long.

2025-01-17

Previous：A Comprehensive Guide to Wall Cleaning Tools by Category for Wuxi

Next：China‘s Role in the Global Maternal and Infant Products Market