How to Wick a Kennedy RDA128

The Kennedy RDA is a popular rebuildable dripping atomizer (RDA) that is known for its excellent flavor and vapor production. However, if you don't wick it properly, you won't be able to enjoy the full potential of this atomizer. In this tutorial, we'll show you how to wick a Kennedy RDA so that you can get the best possible vaping experience.

Materials* Kennedy RDA
* Cotton
* Scissors
* Tweezers

Instructions1. Cut your cotton. The first step is to cut your cotton to the appropriate length. You want the cotton to be long enough to reach the bottom of the juice well, but not so long that it's difficult to fit into the RDA. For a Kennedy RDA, we recommend cutting your cotton to about 3 inches in length.
2. Fluff your cotton. Once you've cut your cotton, you need to fluff it up. This will help to increase the surface area of the cotton and make it more absorbent. To fluff your cotton, simply pull it apart with your fingers.
3. Form the wick. Once your cotton is fluffed, you need to form it into a wick. To do this, simply roll the cotton into a thin rope. The wick should be about the same thickness as the leg of your coil.
4. Insert the wick into the coil. Once you've formed the wick, you need to insert it into the coil. To do this, simply thread the wick through the coil, starting from the bottom. Make sure that the wick is snug, but not too tight.
5. Trim the wick. Once you've inserted the wick into the coil, you need to trim it to the appropriate length. You want the wick to be long enough to reach the bottom of the juice well, but not so long that it's touching the bottom of the atomizer. For a Kennedy RDA, we recommend trimming the wick to about 1/4 inch in length.
6. Prime the wick. Once you've trimmed the wick, you need to prime it. To do this, simply add a few drops of e-liquid to the wick. This will help to saturate the wick and prevent it from burning.
7. Install the RDA. Once you've primed the wick, you can install the RDA on your mod. Make sure that the RDA is securely tightened so that there are no leaks.
8. Vape. Once you've installed the RDA, you can start vaping. Enjoy the delicious flavor and vapor production!

Tips* Use high-quality cotton. The quality of your cotton will have a significant impact on the flavor and vapor production of your RDA. We recommend using Japanese organic cotton.
* Don't over-stuff the wick. If you over-stuff the wick, it will restrict the airflow and make it difficult to get a good vape.
* Don't under-stuff the wick. If you under-stuff the wick, it won't be able to absorb enough e-liquid and you'll get dry hits.
* Experiment with different wicking techniques. There are many different ways to wick an RDA. Experiment with different techniques to find what works best for you.

2024-12-29

Previous：Top Home Blood Pressure Monitors Ranked

Next：Is Xiangyi Bencao Acne-Clearing Cleanser Good for Students?