How to Coil the 528 Goon RDA: A Comprehensive Guide28

The 528 Custom Goon RDA is a popular atomizer known for its build deck, which offers endless possibilities for coil configurations. Among the many techniques, coiling the Goon RDA for optimal performance requires careful attention to detail. This article will provide a step-by-step guide on how to coil the 528 Goon RDA effectively, taking into consideration both flavor and vapor production.

Materials Required:* 528 Custom Goon RDA
* Resistance wire (e.g., Kanthal, Ni80, or Nichrome 80)
* Screwdriver or coil rod
* Scissors or wire cutters

Step-by-Step Coiling Instructions:

1. Prepare the Wire:

Cut a length of resistance wire approximately 6-8 inches long. Strip the ends of the wire to remove any insulation or coating. Straighten the wire using a pair of pliers or tweezers.

2. Create the Coil:

Wrap the wire around the screwdriver or coil rod in a counterclockwise direction. Make sure the coils are evenly spaced and free of any gaps or overlaps. Ideal coil diameter for the Goon RDA is between 2.5mm and 3mm.

3. Fine-tune the Coil:

Use the screwdriver or coil rod to gently push the coils together to ensure they are aligned and tightened. Check the coil's resistance using a multimeter to ensure it meets your desired vaping range.

4. Remove the Excess Wire:

Once the coil is formed, use scissors or wire cutters to trim any excess wire, leaving about 5mm on each side.

5. Position the Coil in the Goon RDA:

Place the coil on the postless build deck of the Goon RDA. Use the included screws to secure the coil. Make sure the coil is centered and level for optimal airflow and performance.

6. Secure the Screws:

Tighten the screws on the posts to hold the coil in place. Avoid overtightening, as this can damage the coil or the Goon RDA.

7. Wick the Coil:

Cut a strip of cotton approximately 3-4 inches long and insert it through the coil. Trim any excess cotton and fluff both ends.

8. Prime the Coil:

Apply a few drops of E-liquid directly onto the cotton wick inside the coil. This will saturate the cotton and prevent it from burning when youvape.

9. Test and Adjust:

Assemble theGoon RDA and attach it to a mod box. Test the coil by taking a few puffs. Adjust the power and airflow settings as needed to achieve the desired flavor and vapor production.

Tips for Optimal Performance:* Use high-quality resistance wire for better flavor and longevity.
* Experiment with different coil diameters and resistances to find the perfect balance of flavor and vapor.
* Make sure the coil is evenly spaced and free of hotspots for optimal heat distribution.
* Prime the coil thoroughly before vaping to prevent dry hits.
* Clean and re-build the coil regularly to maintain optimal performance.

2025-01-07

---

Previous：The Ultimate Guide to PoLoLo Baby Nail Clippers

Next：Where to Buy Dorco Nail Clippers